TMA Truck Hire Sydney
Equipment Hire
Protect road workers and support safer traffic management around active worksites with professional TMA truck hire in Sydney from Wisemonk Road Safety.
A Truck Mounted Attenuator (TMA) is a specialised impact protection system fitted to the rear of a suitable support vehicle. It is designed to absorb and control impact energy if an errant vehicle strikes the rear of the TMA, helping provide an additional layer of protection between approaching traffic and personnel or work vehicles ahead.
Our TMA truck solutions are suited to road construction, maintenance, lane closures and other temporary traffic management activities across Sydney and surrounding areas.
What Is a TMA Truck?
A TMA truck combines a heavy support vehicle with a rear-mounted impact attenuator. During roadworks and maintenance activities, it can be positioned as part of the traffic management arrangement to help protect workers and work vehicles from approaching traffic.
Unlike a standard traffic control vehicle, the attenuator is specifically designed to manage energy during a rear impact.
The TMA does not replace a properly designed traffic management arrangement. Its selection, positioning and operation need to reflect the specific work activity, road environment, traffic conditions and applicable traffic management requirements.
Our Blade Truck Mounted Attenuator
Wisemonk Road Safety uses the Blade Truck Mounted Attenuator, an impact attenuation system designed for roadwork and traffic management applications.
The VERDEGRO BLADE Truck Mounted Attenuator is listed by Transport for NSW as a MASH TL3 accepted truck mounted attenuator.
Its construction uses aluminium alloy together with steel components and is designed to control impact energy during a collision.
MASH Crash Tested
The Blade TMA has undergone full-scale testing under the Manual for Assessing Safety Hardware (MASH) criteria.
Transport for NSW’s current accepted road safety barrier systems and devices documentation lists the VERDEGRO BLADE Truck Mounted Attenuator at MASH TL3.
This makes it suitable for consideration on projects where an accepted TMA is required, subject to the project’s traffic management arrangements, risk assessment and applicable Transport for NSW requirements.
Retractable Design
The Blade TMA can be raised vertically when the attenuator is not deployed.
This configuration helps retain practical use of the truck body for operational requirements such as carrying traffic management equipment, while allowing the attenuator to be deployed when required for the work activity.
Blade TMA Specifications
Key specifications of the Blade TMA include:
- Width: approximately 2,284 mm
- Length when deployed: approximately 5,995 mm
- Length when retracted: approximately 4,195 mm
- Approximate weight: 1,550 kg, including the arrow board
- Crash testing: MASH tested
- TfNSW accepted test level: MASH TL3
- Configuration: truck-mounted impact attenuation system
- Visibility equipment: arrow board configuration available
Actual vehicle and equipment configuration should always be confirmed for the specific project before deployment.
When Is a TMA Used?
TMA trucks are commonly incorporated into temporary traffic management arrangements where workers or work vehicles may be exposed to approaching traffic.
Typical applications can include:

Road Construction
TMA trucks can form part of traffic management arrangements for construction activities carried out on or adjacent to live traffic lanes.

Road Maintenance
Maintenance activities such as pavement repairs, inspections and other short-duration roadworks may require impact protection depending on the road environment and risk assessment.

Lane Closures
A TMA may be positioned as part of a planned lane closure to provide protection between approaching traffic and the work area.

Mobile and Short-Duration Works
Some road activities move progressively along a route rather than remaining at a fixed worksite. An appropriate TMA arrangement may be used where identified by the applicable traffic management documentation and risk assessment.

Emergency and Unplanned Works
Where urgent work needs to take place around live traffic, suitable traffic management equipment may be required to establish a safer work area. Requirements depend on the circumstances and relevant road authority controls.
When Does a Sydney Road Project Need a TMA?
There is no responsible way to say that every Sydney roadwork site requires a TMA.
The requirement depends on factors including the work activity, road environment, traffic conditions, approved traffic management documentation and project-specific risk assessment.
Transport for NSW states that activities using truck or trailer mounted attenuators must be undertaken in accordance with its Traffic Control at Work Sites (TCAWS) requirements and supported by a risk assessment specific to the task.
Your project’s traffic management documentation should therefore determine whether a TMA is required and how it is to be positioned and operated.
Wisemonk Road Safety can help coordinate the TMA requirement with the broader traffic management needs of your project.
TMA Truck Hire for Sydney Roadworks
Every worksite presents different traffic conditions, access requirements and safety risks. Our TMA truck hire Sydney service can support projects ranging from short-duration maintenance activities through to planned road and civil construction works.
Depending on the project requirements, TMA hire can be coordinated alongside other traffic management services and equipment, helping simplify site planning and deployment.
Hire arrangements can be discussed based on:
- Project location
- Required dates and working hours
- Duration of works
- Road and traffic conditions
- Traffic management requirements
- Required TMA configuration
- Associated traffic control requirements
Contact our team with your project details so we can discuss an appropriate hire arrangement.
Why Choose Wisemonk Road Safety for TMA Hire?
Wisemonk Road Safety provides practical traffic management support for worksites across Sydney.
By arranging your truck mounted attenuator hire alongside other traffic control requirements, you can reduce the need to coordinate multiple providers and keep equipment requirements aligned with the broader traffic management arrangement.
Our focus is on providing suitable equipment and traffic management support based on the requirements of each individual project.
Whether you need a TMA truck for planned roadworks, maintenance activities or a temporary lane closure, speak with our team before works commence so the appropriate requirements can be reviewed.
Frequently Asked Questions
What does TMA stand for?
TMA stands for Truck Mounted Attenuator. It is an impact attenuation device mounted to the rear of a suitable support vehicle and used as part of traffic management arrangements to help protect road workers and work vehicles.
Is the Blade TMA MASH tested?
Yes. The Blade Truck Mounted Attenuator has undergone testing under the Manual for Assessing Safety Hardware (MASH) criteria. The VERDEGRO BLADE Truck Mounted Attenuator is currently listed by Transport for NSW as a MASH TL3 accepted device.
Is a TMA required for all roadworks in Sydney?
No. TMA requirements depend on the road environment, work activity, traffic conditions, applicable traffic management documentation and project-specific risk assessment. Requirements should be determined in accordance with the relevant Transport for NSW and project requirements.
Book TMA Truck Hire in Sydney
Need reliable TMA truck hire in Sydney for upcoming roadworks, maintenance or traffic management activities?
Talk to Wisemonk Road Safety about your project requirements. We can help coordinate suitable TMA equipment with your broader traffic management needs and planned work activities.